fpvflying Featured FPV/UAV flying Equipment
Step down PSU 3.3v 5v 9v 12v
Hugin UAV platform (H-tail) $359
RC Flight Stabilization system and RTH unit $334
FY30A Inertial Attitude Stabilizer $125
Mugin 3m UAV platform (TT-tail) $1995
Easy OSD 1.5 $98
Skywalker belly protection GF $22
FY 21 stabilizer RTH without OSD $249
Easy OSD 1.5
The CE OSD is small in size, light weight and plug & play.
This OSD is fully automatic without any manual setup; it adapts to 5 or 10 Hz GPS as well as PAL and NTSC video signal input. RSSI (receiver signal strength identification) is also realized on this tiny OSD.
The OSD requires 6.5-12.6v to operate. The power supply is connected to the camera/transmitter plugs on the OSD, so if you are using a 5V camera, the 5V power must bypass the OSD completely. If you have a 5V camera plugged in to the power connection on the OSD, and you plug the OSD into your main flight battery, you could damage your camera and your video transmitter.
No comments:
Post a Comment